Technical Papers by
ARCCA Engineers
Influence of groove count on slip resistance using NTL test feet.
Journal of Forensic Science (2005). 50(5), 1141-1146
When Driver Safety Fails – Then What? Vehicular Accident Analysis:
The Big Picture—The Risk Benefit Analysis of Seating System Design.
(2005). Philadelphia, PA: American Association of Safety Engineers.
Development of a
Buckle Release Test Procedure (2004-01-0472). (2004). Warrendale,
PA: Society of Automotive Engineers.
Development of a
Buckle Release Test Procedure (2004-01-0472) (2004). SAE 2004
World Congress, Detroit, Michigan. Warrendale, PA: Society of
Automotive Engineers.
Occupant Kinematics
With Child Safety Seats Tested Under Real World Conditions. (2003).
47th Annual Proceedings Association for the Advancement of
Automotive Medicine. Barrington, IL: AAAM.
Children In Rollover
Crashes. Biomedical Engineering: Recent Developments
(2002).Medical and Engineering Publishers, Inc.
Assessment of Timely
Lockup of Web-Sensing Restraint Retractors (2002-01-1548) (2002).
Society of Automotive Engineers' General Aviation Technology
Conference and Exposition, Wichita, Kansas. Warrendale, PA:
Society of Automotive Engineers.
Performance Analysis of Martin-Baker Aircraft Crash Attenuating
Troop Seat System (2002). Proprietary Report.
Lateral Restraint:
Comparison of Lap/Shoulder Belt vs. Lap/Shoulder Plus Supplemental
Shoulder Belt Restraint Systems Revised (2002). SAFE
Association's 40th Annual Symposium. Creswell, OR: SAFE
21st Century Truck Program: Occupant Crash Protection
(2001).
Biomechanics of the
Patient Compartment of Ambulance Vehicles Under Crash Conditions:
Testing Countermeasures to Mitigate Injury. (SAE 2001-01-1173)
(2001). SAE 2001 World Congress, March 2001, Detroit, MI.
Lateral Restraint:
Comparison of Lap/Shoulder Belt vs. Lap/Shoulder Plus Supplemental
Shoulder Belt Restraint Systems. (2001). SAFE Association's 39th
Annual Symposium. Creswell, OR: SAFE.
Development Of A Dynamic Testing Procedure To Assess Crashworthiness
Of The Rear Patient Compartment Of Ambulance Vehicles (Paper number
454-O) (2001). 17th International Technical Conference on the
Enhanced Safety of Vehicles (ESV) Conference, Amsterdam, The
Netherlands. Washington, D.C.: NHTSA.
Method for the
Assessment of Tethered and Untethered Child Restraint Systems using
Hybrid III Three Year Old Dummy. (2001).Injury Biomechanics
Research, Proceedings of the Twenty Seventh International Workshop.
San Diego, CA.
Cognitive Workload Effects on Automatic Restraint Systems’ Manual
Lap Belt Use (2000-01-0174).
(2000). SAE World Congress, Detroit Michigan.
Warrendale, PA: Society of Automotive Engineers.
Common Occupant Crash Protection for Army Wheeled Trucks
(2000-01-1395). (2000). SAE 2000 World Congress, Detroit,
Michigan. Warrendale, PA: Society of Automotive Engineers.
Occupant
Protection During Rollover Events.
(2000).SAFE Proceedings October 9-11, 2000.
Occupant Crash
Protection Handbook for Tactical Ground Vehicles (Light, Medium &
Heavy) (2000). Washington, D.C.: Department of the Army.
High Speed Video Coverage and Analysis Report for Type III Barricade
Testing, performed at The Crash Safety Research Center (1999). State
College, PA: The Pennsylvania Transportation Research Institute, The
Pennsylvania State University.
Pediatric Injury
Research Final Report, Hybrid III Crash Test ATD Research. (1999)
Philadelphia, PA: The Children’s Hospital of Philadelphia.
Vertical Force Crash
Protection for HMMWV Occupants, SBIR Topic No. A97-085. (1998).
Applied Crash
Worthiness (1998). Occupant Crash Protection Training Course at
the Naval Air Warfare Center (NAWC), Patuxent River, MD: U.S.
Navy.
Assessment of
Asymmetrical Anchor Points and Load-Limiting Loops with the Lap
Portion of Automotive Occupant Restraints (1997). 35th Survival
and Flight Equipment SAFE Association, Phoenix, AZ. Creswell,
OR: SAFE.
Booster-with-Shield
Child Restraint Case Studies (SAE 973307). (1997).Second Child
Occupant Protection Symposium (A special joint session sponsored by
Stapp, AAAM, and IRCOBI). Lake Buena Vista, FL: Society of
Automotive Engineers.
Assessment of Timely
Retractor Lockup in Automotive Seat Belt Systems (971515). (1997).
Warrendale, PA: Society of Automotive Engineers.
Restoration of NBDL
12-Inch Hyge Horizontal Accelerator Project Report. (1996).
Washington, D.C.: United States Navy.
Ordnance Handling
Plan for AST Pretensioning Device (PTD) Full Scale Dynamic
Performance Test Program. (1996).
Assessment and
Control of Dynamic Overshoot with Automotive Seating During Vertical
Impacts (951084). (1995). Proceedings of the IX International
Conference on Vehicle Structural Mechanics and CAE, Society of
Automotive Engineers, Troy, MI. Warrendale, PA: Society of
Automotive Engineers.
Analysis of
Relocation Options for NAWC (AD) Horizontal Accelerator Facility
(1994).
Occupant Dynamic
Response to Vertical Acceleration (+Gz) With Automotive Seating.
(1994). Proceedings of the November 1994 Materials Technology for
the 21st Century International Congress and Expo, Chicago, IL.
Burke, VA: ASME.
Ordnance Handling
Plan for Inflatable Body and Head Restraint System (IBAHRS),
Horizontal Accelerator Test Program.(1994).
Requirement for NAWC
(AD) Horizontal Accelerator Facility at Patuxent River. (1994).
Washington, D.C.: United States Navy.